You can execute hook methods around Aurora API Client methods when they are called by the Aurora Command Line commands.
Explaining how hooks work is a bit tricky because of some indirection about what they apply to. Basically, a hook is code that executes when a particular Aurora Client API method runs, letting you extend the method’s actions. The hook executes on the client side, specifically on the machine executing Aurora commands.
The catch is that hooks are associated with Aurora Client API methods, which users don’t directly call. Instead, users call Aurora Command Line commands, which call Client API methods during their execution. Since which hooks run depend on which Client API methods get called, you will need to know which Command Line commands call which API methods. Later on, there is a table showing the various associations.
Terminology Note: From now on, “method(s)” refer to Client API methods, and “command(s)” refer to Command Line commands.
Hooks have three basic types, differing by when they run with respect to their associated method.
pre_<method_name>: When its associated method is called, the pre_ hook executes first, then the called method. If the pre_ hook fails, the method never runs. Later code that expected the method to succeed may be affected by this, and result in terminating the Aurora client.
Note that a pre_ hook can error-trap internally so it does not
return False. Designers/contributors of new pre_ hooks should
consider whether or not to error-trap them. You can error trap at the
highest level very generally and always pass the pre_ hook by
returning True. For example:
def pre_create(...):
do_something() # if do_something fails with an exception, the create_job is not attempted!
return True
# However...
def pre_create(...):
try:
do_something() # may cause exception
except Exception: # generic error trap will catch it
pass # and ignore the exception
return True # create_job will run in any case!
post_<method_name>: A post_ hook executes after its associated method successfully finishes running. If it fails, the already executed method is unaffected. A post_ hook’s error is trapped, and any later operations are unaffected.
err_<method_name>: Executes only when its associated method returns a status other than OK or throws an exception. If an err_ hook fails, the already executed method is unaffected. An err_ hook’s error is trapped, and any later operations are unaffected.
A command with pre_, post_, and err_ hooks defined and activated for its called method executes in the following order when the method successfully executes:
pre_ method hook runspost_ method hook runsThe following is what happens when, for the same command and hooks, the method associated with the command suffers an error and does not successfully finish executing:
pre_ method hook runserr_ method hook runserr_ method does not end the command execution)Note that the post_ and err_ hooks for the same method can never both run for a single execution of that method.
You can associate pre_, post_, and err_ hooks with the following methods. Since you do not directly interact with the methods, but rather the Aurora Command Line commands that call them, for each method we also list the command(s) that can call the method. Note that a different method or methods may be called by a command depending on how the command’s other code executes. Similarly, multiple commands can call the same method. We also list the methods’ argument signatures, which are used by their associated hooks.
| Aurora Client API Method | Client API Method Argument Signature | Aurora Command Line Command |
|---|---|---|
cancel_update |
self, job_key |
job cancel-update |
create_job |
self, config |
job create, runtask |
restart |
self, job_key, shards, update_config, health_check_interval_seconds |
job restart |
update_job |
self, config, health_check_interval_seconds=3, shards=None |
job update |
kill_job |
self, job_key, shards=None |
job kill |
start_cronjob |
self, job_key |
cron start |
start_job_update |
self, config, instances=None |
update start |
Some specific examples:
pre_create_job executes when a create_job method is called, and before the create_job method itself executes.
post_cancel_update executes after a cancel_update method has successfully finished running.
err_kill_job executes when the kill_job method is called, but doesn’t successfully finish running.
By default, hooks are inactive. If you do not want to use hooks, you do not need to make any changes to your code. If you do want to use hooks, you will need to alter your .aurora config file to activate them both for the configuration as a whole as well as for individual Jobs. And, of course, you will need to define in your config file what happens when a particular hook executes.
You can define a top-level hooks variable in any .aurora config file. hooks is a list of all objects that define hooks used by Jobs defined in that config file. If you do not want to define any hooks for a configuration, hooks is optional.
hooks = [Object_with_defined_hooks1, Object_with_defined_hooks2]
Be careful when assembling a config file using include on multiple smaller config files. If there are multiple files that assign a value to hooks, only the last assignment made will stick. For example, if x.aurora has hooks = [a, b, c] and y.aurora has hooks = [d, e, f] and z.aurora has, in this order, include x.aurora and include y.aurora, the hooks value will be [d, e, f].
Also, for any Job that you want to use hooks with, its Job definition in the .aurora config file must set an enable_hooks flag to True (it defaults to False). By default, hooks are disabled and you must enable them for Jobs of your choice.
To summarize, to use hooks for a particular job, you must both activate hooks for your config file as a whole, and for that job. Activating hooks only for individual jobs won’t work, nor will only activating hooks for your config file as a whole. You must also specify the hooks’ defining object in the hooks variable.
Recall that .aurora config files are written in Pystachio. So the following turns on hooks for production jobs at cluster1 and cluster2, but leaves them off for similar jobs with a defined user role. Of course, you also need to list the objects that define the hooks in your config file’s hooks variable.
jobs = [
Job(enable_hooks = True, cluster = c, env = 'prod') for c in ('cluster1', 'cluster2')
]
jobs.extend(
Job(cluster = c, env = 'prod', role = getpass.getuser()) for c in ('cluster1', 'cluster2'))
# Hooks disabled for these jobs
All Aurora Command Line commands now accept an .aurora config file as an optional parameter (some, of course, accept it as a required parameter). Whenever a command has a .aurora file parameter, any hooks specified and activated in the .aurora file can be used. For example:
aurora job restart cluster1/role/env/app myapp.aurora
The command activates any hooks specified and activated in myapp.aurora. For the restart command, that is the only thing the myapp.aurora parameter does. So, if the command was the following, since there is no .aurora config file to specify any hooks, no hooks on the restart command can run.
aurora job restart cluster1/role/env/app
Any object defined in the .aurora config file can define hook methods. You should define your hook methods within a class, and then use the class name as a value in the hooks list in your config file.
Note that you can define other methods in the class that its hook methods can call; all the logic of a hook does not have to be in its definition.
The following example defines a class containing a pre_kill_job hook definition that calls another method defined in the class.
# Defines a method pre_kill_job
class KillConfirmer(object):
def confirm(self, msg):
return raw_input(msg).lower() == 'yes'
def pre_kill_job(self, job_key, shards=None):
shards = ('shards %s' % shards) if shards is not None else 'all shards'
return self.confirm('Are you sure you want to kill %s (%s)? (yes/no): '
% (job_key, shards))
pre_ methods have the signature:
pre_<API method name>(self, <associated method's signature>)
pre_ methods have the same signature as their associated method, with the addition of self as the first parameter. See the chart above for the mapping of parameters to methods. When writing pre_ methods, you can use the * and ** syntax to designate that all unspecified parameters are passed in a list to the *ed variable and all named parameters with values are passed as name/value pairs to the **ed variable.
If this method returns False, the API command call aborts.
err_ methods have the signature:
err_<API method name>(self, exc, <associated method's signature>)
err_ methods have the same signature as their associated method, with the addition of a first parameter self and a second parameter exc. exc is either a result with responseCode other than ResponseCode.OK or an Exception. See the chart above for the mapping of parameters to methods. When writing err_ methods, you can use the * and ** syntax to designate that all unspecified parameters are passed in a list to the *ed variable and all named parameters with values are passed as name/value pairs to the **ed variable.
err_ method return codes are ignored.
post_ methods have the signature:
post_<API method name>(self, result, <associated method signature>)
post_ method parameters are self, then result, followed by the same parameter signature as their associated method. result is the result of the associated method call. See the chart above for the mapping of parameters to methods. When writing post_ methods, you can use the * and ** syntax to designate that all unspecified arguments are passed in a list to the *ed parameter and all unspecified named arguments with values are passed as name/value pairs to the **ed parameter.
post_ method return codes are ignored.
There are seven Aurora API Methods which any of the three hook types can attach to. Thus, there are 21 possible hook/method combinations for a single .aurora config file. Say that you define pre_ and post_ hooks for the restart method. That leaves 19 undefined hook/method combinations; err_restart and the 3 pre_, post_, and err_ hooks for each of the other 6 hookable methods. You can define what happens when any of these otherwise undefined 19 hooks execute via a generic hook, whose signature is:
generic_hook(self, hook_config, event, method_name, result_or_err, args*, kw**)
where:
hook_config is a named tuple of config (the Pystashio config object) and job_key.
event is one of pre, err, or post, indicating which type of hook the genetic hook is standing in for. For example, assume no specific hooks were defined for the restart API command. If generic_hook is defined and activated, and restart is called, generic_hook will effectively run as pre_restart, post_restart, and err_restart. You can use a selection statement on this value so that generic_hook will act differently based on whether it is standing in for a pre_, post_, or err_ hook.
method_name is the Client API method name whose execution is causing this execution of the generic_hook.
args*, kw** are the API method arguments and keyword arguments respectively.
result_or_err is a tri-state parameter taking one of these three values:
pre_hooksresult for post_ nooksexc for err_ hooksExample:
# Overrides the standard do-nothing generic_hook by adding a log writing operation.
from twitter.common import log
class Logger(object):
'''Adds to the log every time a hookable API method is called'''
def generic_hook(self, hook_config, event, method_name, result_or_err, *args, **kw)
log.info('%s: %s_%s of %s'
% (self.__class__.__name__, event, method_name, hook_config.job_key))
.aurora config file, add a hooks variable. Note that you may want to define a .aurora file only for hook definitions and then include this file in multiple other config files that you want to use the same hooks.hooks = []
hooks variable, list all objects that define hooks used by Jobs defined in this config:hooks = [Object_hook_definer1, Object_hook_definer2]
For each job that uses hooks in this config file, add enable_hooks = True to the Job definition. Note that this is necessary even if you only want to use the generic hook.
Write your pre_, post_, and err_ hook definitions as part of an object definition in your .aurora config file.
If desired, write your generic_hook definition as part of an object definition in your .aurora config file. Remember, the object must be listed as a member of hooks.
If your Aurora command line command does not otherwise take an .aurora config file argument, add the appropriate .aurora file as an argument in order to define and activate the configuration’s hooks.